The ProLine High Recovery gas water heater provides the highest recovery among residential gas heaters. Designed for reliable performance at reduced NOx emissions.
With 81 gallon per hour recovery rate, 80% thermal efficiency and 0.58 Uniform energy factor, it is great for big families and high-demand applications.
Price
LPG-fired water heaters heat by burning propane gas to heat water efficiently. These need a source of fresh air and need proper venting.
Cold water enters through a dip tube which forces the cold water to go to the bottom of the tank and pushes hot water out through the outlet connection.
This heater uses piezo ignition with an electronic gas valve. When cold water enters the heater, the temperature sensor signals the gas valve to open. Gas flows to the burner and is ignited by the pilot light. When the target temperature is reached, the gas valve shuts off.
Features
Why Choose Our Product
Features
Highest Recoveries
75,100 BTU burner produce recovery up to 81 gallons per h
Fully Automatic Controls with Safety Shutoff
Accurate control system with no electric connections
Green Choice Gas Burner
Eco-friendly burner design complies with Low-NOx emission requirements
Dynaclean Diffuser Dip Tube
Reduces lime and sediment buildup
Coregard Anode Rod
Anode rod with stainless steel core provides superior tank protection
Push-button Piezo Ignitor
Push-button spark ignition for easier and faster lighting
Factory-installed Nipples
For faster installation
Blue Diamond Glass Coating
Commercial-grade glass coating provides superior corrosion resistance
Enhanced-flow Brass Drain Valve
Solid brass, tamper resistant, ball type drain valve designed for easy operation
CSA Certified and ASME Rated T&P Relief Valve
Temperature and pressure relief valve protects the tank against excessive temperature and pressure
Code Compliance
Meets UBC, CEC, and ICC National Code.
Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IES 90.1
UL Listed according to ANSI Z21.10.3 CSA 4.3 standards governing storage tank-type gas water heaters
Certified at 300 psi test pressure and 150 psi working pressure
| Nominal Capacity | 98 gal (370 L) |
| Rated Storage Volume | 95 gal (359 L) |
| UEF | 0.58 |
| First Hour Rating | 170 gal |
| Input (BTU/hr) | 75,100 |
| Recovery @ 90°F Rise | 81 gal per hour |
| Ignition Mode | Piezo-ignited |
| Dimensions (Height x Diameter) | 68.5" x 27.75" |
| Weight | 340 lbs |
| Water Connections | 1-1/4" NPT |
| Attachment | Size |
|---|---|
| FCG Atmospheric Vent Gas Heater Spec Sheet (1).pdf | 251.91 KB |
| FCG-100 User Manual.pdf | 1.79 MB |