The ProLine High Recovery gas water heater provides the highest recovery among residential gas heaters. Designed for reliable performance at reduced NOx emissions.

With 81 gallon per hour recovery rate, 80% thermal efficiency and 0.58 Uniform energy factor, it is great for big families and high-demand applications.


How It Works

LPG-fired water heaters heat by burning propane gas to heat water efficiently. These need a source of fresh air and need proper venting.

Cold water enters through a dip tube which forces the cold water to go to the bottom of the tank and pushes hot water out through the outlet connection.

This heater uses piezo ignition with an electronic gas valve. When cold water enters the heater, the temperature sensor signals the gas valve to open. Gas flows to the burner and is ignited by the pilot light. When the target temperature is reached, the gas valve shuts off.




Why Choose Our Product



  • Highest Recoveries

    75,100 BTU burner produce recovery up to 81 gallons per h

  • Fully Automatic Controls with Safety Shutoff

    Accurate control system with no electric connections

  • Green Choice Gas Burner

    Eco-friendly burner design complies with Low-NOx emission requirements

  • Dynaclean Diffuser Dip Tube

    Reduces lime and sediment buildup

  • Coregard Anode Rod

    Anode rod with stainless steel core provides superior tank protection

  • Push-button Piezo Ignitor

    Push-button spark ignition for easier and faster lighting

  • Factory-installed Nipples

    For faster installation

  • Blue Diamond Glass Coating

    Commercial-grade glass coating provides superior corrosion resistance

  • Enhanced-flow Brass Drain Valve

    Solid brass, tamper resistant, ball type drain valve designed for easy operation

  • CSA Certified and ASME Rated T&P Relief Valve

    Temperature and pressure relief valve protects the tank against excessive temperature and pressure

  • Code Compliance

    Meets UBC, CEC, and ICC National Code.

    Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IES 90.1

    UL Listed according to ANSI Z21.10.3 CSA 4.3 standards governing storage tank-type gas water heaters

    Certified at 300 psi test pressure and 150 psi working pressure

Nominal Capacity98 gal (370 L)
Rated Storage Volume95 gal (359 L)
First Hour Rating170 gal
Input (BTU/hr)75,100
Recovery @ 90°F Rise81 gal per hour
Ignition ModePiezo-ignited
Dimensions (Height x Diameter)68.5" x 27.75"
Weight340 lbs
Water Connections1-1/4" NPT
User Manual and Leaflets